>>>18650 Cylinder Cell Case(cylinder cell case):
1.Case Dimensions:18mm(OD) x 17.5mm(ID) x 67mm(H)
2.Top Cap:17.5mm(D) x 4.05mm(H)
18650 Cylinder Cell Case with 18650 cylinder cell Anti-Explosive Cap and 18650 cylinder cell Insulation O-ring
>>>18650 Cylinder Cell Case spec(cylinder cell case):
|Case Dimensions||18mm(OD) x 17.5mm(ID) x 67mm(H)|
Dimensions: 17.5mm(D) x 4.05mm(H)
Safety valve's open pressure: 2.5MPa (the cap valve will open to release interior high pressure if over 2.5MPa to ensure no explosion from the can)
|Dimensions: 12.5mm(D) x 0.19mm(H)|
|Bottom Insulator||Dimensions: 12.5mm(D) x 0.19mm(H)|
|Net Weight||9.50 g/pcs|
Optional safety protection: Positive Temperature Coefficient (PTC) Thermistor is built into the cap by request
PTC Thermistor will break the current when heated to 120ºC
|To seal the cylinder cell, you should firstly groove it by MSK-500 and then crimp it by GN-510|
>>>We can supply(cylinder cell case):
Type: CR 2016, 2025 2032 2450...
Coin cell cases with 316 stainess steel:
Coin cell cases with 304 stainess steel:
>>>What's Our Offer And Guarantee(cylinder cell case):
a. Offer full set of equipments line for CR20xx cells or other Li Batteries.
b. Offer full set of materials for CR20xx cells or other Li Batteries .
c. Offer technology trainning for CR20xx cells or other Li Batteries .
d.One years free maintain for all equipments, and for all equipment parts, Only charge for cost forever
>>>Bolivia Project(cylinder cell case):
--In 2013, our Bolivia Project for EV batery production line has completed successfully.
--We Gelon LIB Group offer one-stop service for Bolovia from establishing the battery making factory, supply li ion battery materials and equipment, technology support...Until produce the EV battery and gain the final successful.
--Bolivia president and goverment gave a full support and confirm.
--And our next project for Indonisia will start this year.
>>>More information about our battery products you can visit our website(cylinder cell case):
Turn-key Project of Li Battery (Lab, Mobile, EV) Production Line
In Feb. 2014, the turn-key project in Bolivia was completed successfully.
Bolivia News Videos:
Battery Tab Welding Process:
Winding Process (Manual/Semi-Auto):
Standing after Filling Electrolyte:
Al-plastic Film Cup Punching/Forming:
Pouch Press & Test:
>>>Besides, We also can supply others(cylinder cell case):
1. )full set of lithium battery materials, including:
LiMn2O4, LTO, LiNiMnCoO2(NMC), LiCoO2, Graphite(MCMB)and other cathode&anode battery materials; Alumimun foil, copper foils, battery separator, etc.
2. )full set of lithium battery equipments, for example:
Mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine, etc.
3)full set of lithium battery technology
We can design the laboratory and production line, according to customer's request.
>>>Any morerequest, pls feel free to contact us by(cylinder cell case):