Lithium Battery Production Line Auto Electrode Stacking Machine
Machine function
This machine is designed for large square lithium-ion battery, use Z-shaped stacking method. The machine through four manipulator to take the cathode and anode electrodes from the material cabinet to the position taken place on the second platform, after framing station and then placed on the stacking platform, it is with automatic clamping device. The machine has a diaphragm correction, anti-bending multi-piece electrode piece, the material cabinet automatically ion wind blow (let electrode drifted away to prevent double sheet), the secondary function of the position table blowing dust. Can automatically laminate, automatic counting, automatic compression, automatic cut diaphragm, batteries automatic tail roll, batteries sent automatically, manually check the batteries attached tape. This machine has the following means: Diaphragm constant tension control device, the diaphragm correction device, cathode and anode film transfer device, the cathode and anode anti-bending electrode multi-piece unit, the positive and negative secondary alignment device, the ion wind blowing pod device, the second to blow the dust removal device-bit platform, positive and negative film lifting device, batteries clamping device, the diaphragm cutting device, the diaphragm recovery, membrane recycling corrective devices, batteries tail winding device, batteries transfer device .
Suitable battery core specification(can be customized according to the buyer's request)
Size
Item |
GN-DP300A |
Size |
Thickness H(mm) |
8~20 |
Width W(mm) |
80-150 |
Length L(mm) |
200~300 |
Tab length Q(mm) |
Q≤30 |
Tab width (mm) |
≤50 |
Single piece efficiency:2-2.5s/pc
single cell making time :20S-40S
Battery core thickness :<20mm