Scope of application: suitable for LFP, LCO, LMO, NMC, LTO and so on battery materials rolling process
2. Suitable for incoming material specification :100~350 mm, coil diameter ≤400 3. Output product indicators: 3.1 The thickness uniformity of the electrode sheet after roll pressing:≤±0.002mm( Required incoming thickness accuracy:≤±0.002mm) 3.2 Winding edge alignment error:≤±0.3mm
Equipment installation requirements: 1 . The main engine section requires a ground bearing ≥ of 2.5 t/m2(or a foundation based on the foundation map provided) 2 . Power supply: 380V±5%,50Hz Three-phase five-wire system 3 . Total power: 40kW+10% Safety factor/set 4 . Compressed air: Pressure 0.2~0.7MPa, Flow rate:20L/min, External diameter of interface tube: 8mm 5 . Use environment: Temperature range 0~45ºC Relative humidity :≤30% 6 . Tube diameter : 3 inch, barrel length ≤350 mm
Functional indicators of equipment:
Dimensions of continuous rolling line (length * width * height):4.6×2.8×1.95 m
2. Total equipment weight: approximately 9 tons 3. Layout: Left/right (see power drive from feed end on left/right side) 4. Roll line speed:1-12m/min 5. Maximum pressure between rollers:1500kN 6. Integrated efficiency of equipment:OEE≥95 7. Formula: OEE= availability × performance × product pass rate
We also can supply others(LMFP):
1. )full set of lithium battery materials, including:
LiMn2O4, LTO, LiNiMnCoO2(NMC), LiCoO2, Graphite(MCMB)and other cathode&anode battery materials; Alumimun foil, copper foils, battery separator, etc.
2. )full set of lithium battery equipments, for example:
Mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine, etc.
3)full set of lithium battery technology.
We can design the laboratory and production line, according to customer's request.