Electrode Slitter/Slitting Machine for Li-ion Battery Making Machine
Introduction:
This machine is mainly suitable for the cut-off lithium ion battery electrode. The main structure consists of cutter cutting mechanism, cutter driving mechanism and feed discharging device.
Function:
The electrode of Li-ion battery is cut to the desired length in advance, and the cut electrode is set straight against the feed guide edge, and then lightly supported into the cutter system with a light hand. The hand must always stabilize the pole piece during operation, to prevent the gap between the lead edge and the pole and to cut off. The splitter is required to cut 100mm, 90mm and 50mm wide poles at the same time on a splitter.The electrode of Li-ion battery is cut to the desired length in advance, and the cut electrode is set straight against the feed guide edge, and then lightly supported into the cutter system with a light hand. The hand must always stabilize the pole piece during operation, to prevent the gap between the lead edge and the pole and to cut off. The splitter is required to cut 100mm, 90mm and 50mm wide poles at the same time on a splitter.
Technical parameter:
- Slitting material: aluminum foil/copper foil and lithium ion battery cathode/anode sheet
- Slitting type: Disc cutting cutter (material)
- Material thickness: 15-350um
- Slitting max width: 400mm ,500m
- Slitting min width: 50mm
- Slitting width accuracy: ±0.1mm(ensure flat flattening vertical and operating level)
- Split-pole edge burr: ≤17um
- Electrode surface state: No wrinkling, creasing, powder dropping, etc., on the surface of the pole after shearing
- Number of cutting knives and cutters: Depending on customer requirements (standard 10 sets)
- Compartment specification: For slitting electrode width 100 mm, 90 mm, 50mm
- Blade service life: Slitting 100000 square meters at a time to ensure that the burrs are within the 15um range and can be ground back for about 10 times
- Shearing speed: 8m/min
- Power of motor: 200W
- Supply power: Single phase, 50Hz,200V
We could supply one stop solution ( turn key project) for lithium ion battery production line.
1.Full set of lithium battery materials,including :
LiMn2O4,LTO,LiNiMnCoO2(NMC),LiCoO2,Graphite(MCMB)and other cathode&anode battery materials;Aluminum foil,copper foils,battery separator,etc.
2.Full set of lithium battery equipments,for example:
mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine,etc.
3.Full set of lithium battery technology.
we can design the laboratory and production line,according to customer's request.
Our Projects
TKS FOR YOUR TIME,WELCOME TO INQUIRY.
Audited Supplier 
){kind=link}