Continuous Calendaring Machine for Battery Production Line

• Customization: Available
• Brand: Gelon
• Rolling Width: 100-500mm Width
• Model NO.: continuous rolling press machine
• Rpm of Rolls: 0.1--2.2r/Min(Adjustable)
• Linear Speed: 0.1--2m/Min (Adjustable)
• Electrode Width: 100--240mm
• Calendering Thickness: 0-1mm Adjustable
• Coating Uniformity: +/=0.003mm(The Buyer′s Assurance)
• Transport Package: Standard Exporting Package
• Specification: continuous rolling width 100-500m
• Trademark: Gelon
• Origin: Shandong China
• Production Capacity: 2000 Set /Month

Product Description

Main parameters

Roll size:                                                   φ300×300mm(Diameter×Barrel length)

Rpm of rolls  :                                           0.1--2.2r/min  (adjustable)

Linear speed :                                         0.1--2m/min  (adjustable)

Electrode width :                                    100--240mm

Calendering thickness :                         0-1mm adjustable

Coating uniformity  :                               ±0.003mm(the Buyer's assurance)

Electrode thickness uniformity after pressing:  ≤±0.003mm

Max. pressure between rolls:                30t

Oil heating :                                             Ambient - 85ºC(adjustable)

Operation condition :     No danger (Pay attention to the caution on the machine), feeding safe guard
 

Calender machine Parameters

Function :                                 To press the electrode to certain thickness under pressure of rolls

Structure  :                               2-high, up-and-down position and parallel with the floor

Size of machine:                     Approx. 2100×1500×1500mm(L×W×H)

Bearing chock :            Monobloc cast steel 45# rigid structure, adjustable support block for clearance                                        eliminating

Bearing   :                    4-row cylindrical roller bearing, adjustable clearance

Lubrication:                MoO2 Li base grease

Rolls  :                       φ300×300mm(Diameter×Barrel length)

                                  Usable width :         100--240mm

                                   Material:                  Cr2 High alloy cold steel

                                   Hadness:                HRC≥65(inspection certificate)

                                   Hardening depth:  8~10mm

                                 Radial run-out ≤±0.003m

                                 Roughness Ra≤0.4

                                Diameter tolerance of 2 rolls ≤0.02mm

                               Hard Cr coating of roll surface, coating thickness

                              on radius 80-120u m

Radial run-out after assembled:    ≤±0.003mm (no load)

Roll gap adjustment:                        Adjustment accuracy: 0.001mm(indicated on touch screen)

 Adjusting range:                             0-1mm;

Driving mode   :                            single motor direct connected Top roll driving and bottom roll driven

Driving system:            Reducer motor:5.5kW (380V 50Hz) frequency converter regulated;

Compression  :         Foot pump

Max. roll pressure:       Approx. 30t

Weight   :              Approx. 2.5t

Layout    :             The driving unit is on the left of feeding side (standing on the side of feeding part and facing the press machine, the motor is on the left side.)

Safety  :               A safeguard is equipped on the feeding side to prevent operator's hand entering into the roll gap. Emergency stop switch