Lithium Battery Ultrasonic Welding Machine for Metalcopper Foil and Aluminum Foil

• Customization: Available
• After-sales Service: 1
• Warranty: 1
• Model NO.: GN-4200
• Input Voltage: 220V/50Hz
• Welding Thickness: <0.3mm
• Welding Material: Copper and Aluminum
• Control Way: CPU
• Transport Package: Standard Exporting Package
• Trademark: Gelon
• Origin: Shandong China
• Production Capacity: 200set/Month

Product Description

1.Major technique parameter:
 

This ultrasonic spot welder is worked through solid phrase weld, and the weldments are effected by high-mode vibration and the stress of all the work pieces.
Max output power	4200VA
ultrasonic frequency	About 20HZ
input voltage	220V/50HZ
air supply
	0.5~0.6Mpa
control way	CPU
working stroke	15mm
welding time	0.1~1S
welding ability	Multilayer copper and aluminum below 0.3mm
SizeL× W× H(mm)	Chassis: 600*710*450

2. Equipment parts and function 
1) Limit route can be adjusted:Adjust the space between the welding head through one screw
2) Amplitude transformer:Increase the wavelength of higher-mode vibration 
3) Up tone mould:Connect with amplitude transformer, transfer ultrasonic, melt the articles 
4) Down tone mould:Fixed the weldment
5) Four balance screw:Adjust the balance of the down seat weld
6) Fixed balance plate screw:Fix the  balance plate Power switch
7) switch on or off for the power
8) Indicator of overload:The effect of protecting when  stoppage 
9) Reset switch:start reset
10) Sound wave testing:testing of ultrasonic send
11) Testing of pneumatic:Switch on or off for testing of pneumatic 
12) Power can be adjusted:The power can adjusted according to different work piece
13) PLC procedure:Used for controlling the time of welding ,squeezing ,and re-weld
14) Load meter:Used for detecting the parameter when no-load and weld
15) Gas-pressure meter:Show the air pressure when weld
16) Water knockout vessel:Separate and isolate air moisture
17) Locking the screw:It is used the system of fastening transducer energy converter
18) Solenoid valve:control cylinder stator
19) Floor push:It is used in welding control




1. Full set of lithium battery materials, including:

LiMn2O4, LTO, LiNiMnCoO2(NMC), LiCoO2, Graphite(MCMB)and other cathode&anode battery materials; Aluminum foil, copper foils, battery separator, etc.

2. Full set of lithium battery equipments, for example:

Mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine, etc.

3. Full set of lithium battery technology.

We can design the laboratory and production line, according to customer's request.

Any more comments, please feel free to contact me: