Small Lab Coating Machine (Max. 250mm Width) with Drying Oven -Gn-Dyg-135

• Customization: Available
• Type: Coating Production Line
• Coating: Slurry Coating
• Model NO.: GN-DYG-135
• Substrate: Copper
• Condition: New
• Heating Zone: 1 Zone
• for Baseband: Copper Foil, Aluminum Foil, etc
• Coating Method: Single Row
• Retractable Tension: Adjustable
• Coated Precision: <= +-0.003mm
• Pole Piece Width: <=300mm
• Furnace Temperature: Room Temperature~150c Adjustable
• Transfering Speed: 1m/Min Continuously Adjustable
• Provide: Full Set Lithium Battery Materials and Equipment
• Offer: One Stop Service for Li Ion Battery Project
• Transport Package: Standard Exporting Package
• Specification: according customer request
• Trademark: Gelon
• Origin: Linyi, Shandong, China
• Production Capacity: 500000000 Set Per Week

Product Description

Small Lab coating machine (Max. 250mm Width) with Drying Oven -DYG-135




This equipment is mainly used for lithium battery pole piece in the production process
Slurry drying process, I s mainly used in the experiments, using this technology can
Replace the ori ginal production of hand-scraped pulp, oven drying operations, and
Improve the uniformity and scrape pulp drying efficiency is indispensable
Equipment for mass production.



Device structures:
This equipment received by the main drive pulley driven movement, metal
Belt pulley mounted on the release, in the driving wheel driven slowly walked
From scratch slurry tank, slurry coated tapes made by scraping pulp slurry evenly
After attached to the belt by adjusting the roll gap scraping pulp and process to
Achieve the required size. Then after oven drying, and then Re-rolling good.
The equipment features:

The equipment brought by the discharge roller, magnetic powder brake
Unwinding, scraping slurry tank, coating roll, closing with a roller, to close with a
Tension adjusting mechanism, dry boxes, some of the main drive, fan and
Chassis, electrical parts etc., simple structure, compact, and also simple and
Convenient.

Using pre-prepared:
1. Equipment placed in place, the level should be adjusted;
2. Wipe clean the roller, coating should focus on cleaning up bucket, roller, blade
Oil should go on the net, to prevent the impact of sizing;
3. The transmission part of the lubrication;
4. Access to the equipment required by the circuit three-phase 380V AC power,
And its reliable grounding.

Adjustand use:
1. Adjustment roller and scrape pulp slurry coating gap between the requirement
To value.
2. Sizing of the metalstrip will be put in place with a roller and allowed to fight in
The plasma from the coating to the oven through the entrance, with the scrap
Metal strip from the oven through to closing with a roller at the entrance to the
Old band in the oven overlap with the new band.
3. Close the "Power Control" switch, power indicator lights.
4. The "rewindingtension", "winding tension, "knob switch to the "on" Office,
Adjust "rewinding tension adjustment", "winding tension adjust" knob to tension
Directed to the appropriate value of current meter.
5. The " fancontrol, " knob switch to the "on" Office, "temperature control"
Devices have electrical work, temperature control instrumentation for use by
Setting the required drying temperature. To "Heating control" switch right at "on"
4
Department so that the oven temperature to set temperature.
6. Adjust scraper scrape pulp space requirements found in the pulp slurry added
To struggle. Click the "coating control start" button, start a continuous coating
Coating motor rotation, adjust the speed inverter controls to meet the need to go
With speed.
7. Click the "Exhaust Control Start" button to switch to open exhaust systems.
8. Slurry coating after the tape after drying with a roll after the paper received
Well. Work under dry conditions at any time adjust the belt speed, according to a
Retractable reel diameter change at any time to adjust track tension to prevent
Belt retractable belt.
9. Downtime:
Click the "coating control stop" button to stop the coating, the "drying control
Heating" L switch to "off" stops heating, the " fan control, " L switch knob to "off"
Hot air circulation stops, click the "Stop exhaust control" button switches turn off
Ventilation systems. Finally, "Power Control" switch power off.



We can provide many kind of coating machine for lab/pilot/mass prooduction line, so pls kidly contact by

 

Model	Lithium ion Battery Coating Machine  GN-DYG-135
Source voltage	AC 220V/110V, 50HZ
Power	6500 W
Warranty	One Year limited warranty with lifetime support
Max electrode width	300mm
Coating speed	1 m /min, adjustable
Coating accuracy	≤± 0.003mm
Roller diameter	Φ100mm
Max coating roller diameter	Φ250mm
Control pressure	5-50N, adjustable
Dry temperature	RT-150 °C , adjustable
Oven length	1.2m
Air compression	0.5-0.7MPa
Coating mode	Single face continuous coating
Application foil	Aluminum foil, Copper foil
Weight	About 10 5 0kg
Dimension(L*W*H)	1800*810*1300mm
Advantage	1  Scraping system, parts processing precision, slurry contact part stainless steel structure, scraping thickness adjustable . 2  Main transmission adopts frequency control of motor speed, wide speed range speed constant and reliable for the speed control system, constant torque 3  Drying box adopts far infrared heating pipe, high heat efficiency, long service life 4  Using hot air circulation system, can make the temperature uniform, not easy to burn the pole piece 5  Temperature control adopts PID control system, high control accuracy, reliable work 6  The reeling adopts automatic correction system, pole piece coiling system