| Customization: | Available |
|---|---|
| Type: | Roll Slitter |
| Work Method: | Round Knife Cutting |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This equipment is mainly used to cut the battery electrode,applied for cutting big electrode into small ones,adopted without an interspace knife to cut,ensure the precision of size,which is widely used in the electrode manufacture of li-ion batteries,polymer batteries.
The electrode of Li-ion battery is cut to the desired length in advance, and the cut electrode is set straight against the feed guide edge, and then lightly supported into the cutter system with a light hand. The hand must always stabilize the pole piece during operation, to prevent the gap between the lead edge and the pole and to cut off. The splitter is required to cut 100mm, 90mm and 50mm wide poles at the same time on a splitter.The electrode of Li-ion battery is cut to the desired length in advance,and the cut electrode is set straight against the feed guide edge, and then lightly supported into the cutter system with a light hand. The hand must always stabilize the pole piece during operation, to prevent the gap between the lead edge and the pole and to cut off. The splitter is required to cut 100mm, 90mm and 50mm wide poles at the same time on a splitter.
1) Simple structure is convenient to mounting and trial run, according to the buyer's slitting specification, manufacturer will
assemble the hobbing cutters and adjust the clearance between the rollers. end users only need link the equipment to power supply,it will work.
2) It is easy to operate; operator only need pay attention to safety.
3) The slitting precision is of high precision, and the slit plates loss no powder.
4) It is simple to maintain, of less fast wearing parts and high reliability.
|
Items
|
Patameters
|
|
Slitting material
|
Aluminum foil/copper foil and lithium ion battery cathode/anode sheet
|
|
Slitting type
|
Disc cutting cutter (material)
|
|
Material thickness
|
15-350um
|
|
Slitting max width
|
400/500mm
|
|
Slitting min width
|
50mm
|
|
Slitting width accuracy
|
±0.1mm(ensure flat flattening vertical and operating level)
|
|
Split-pole edge burr
|
≤17um
|
|
Electrode surface state
|
No wrinkling, creasing, powder dropping, etc., on the surface of the pole after shearing
|
|
Compartment specification
|
For slitting electrode width 100 mm, 90 mm, 50mm
|
|
Shearing speed
|
8m/min
|
|
Power of motor
|
200W
|
|
Supply power
|
Single phase, 50Hz,220V
|
Gelon Popular Pilot/Lab Production equipment Electrode Slitter/Slitting Machine for Lithium Ion Battery Making
){kind=link}