Battery Machine Semi-Automatic Cylinder Cell Winding Machine

• After-sales Service: Online
• Warranty: 1year
• Brand Name: Gelon
• Product Name: Cylinder Battery Winding Machine
• Power Supply: AC220V, 50/60Hz
• Power: 1kw
• Model NO.: GN-WS
• Speed: 0~170 Rpm Adjustable
• Guide Plate (Length * Width): 150*105mm
• Needle (18650 Standard) Size: 4 * 125 mm
• Roll Sheet: 120*43.5*0.8mm
• Deflection of Winding Head: 0.5 mm
• Air Source: 5-7kgf/Cm2,100L/Min
• Diameter of Winding Needle: 3.5mm or 4.0mm
• Separator Width: 40-70 mm
• Electrode Width: 38-68 mm
• Electrode Length: 400-1500 mm
• Tape Width: 30-80 mm
• Transport Package: Wooden Box
• Specification: CE
• Trademark: Gelon
• Origin: China
• Production Capacity: 20sets/Month

Product Description

Battery Machine Semi-Automatic Cylinder Cell Winding Machine

This machine is mainly used for precision winding of 18650,21700,32650 batteries. The working process is as follows: the positive and negative plates are manually introduced into the winding part, stacked with the separator, and wound according to the process requirements, the termination tape is automatically attached, and the battery core is automatically discharged.

1. Adopt single winding needle structure, the diameter of the winding needle can be replaced.
2. Manual introduction of pole piece, automatic winding, automatic needle change, automatic tape termination and automatic blanking;
3. The glue application position can be accurately controlled without tightening the battery core; the glue application is stable and reliable;
4. The winding needle winding adopts the latest original variable-angle speed rotation technology, so that the linear velocity of the diaphragm and pole piece feed is relatively constant, that is, the purpose of constant tension during the winding process is achieved, and the winding of the battery core is neat and consistent.


 

Features	Color touchscreen control Winding motor direction control: forward and reverse switchable (manual mode) Adjustable tension (0 - 4 N) for both top and bottom separator films Vacuum-assisted, 1200 mm long feeder bed for accurate cathode/anode film positioning & feeding Automatic finish cut upon the completion of the configured number of rotations Suitable for cylindrical battery sizes such as 18650, 21700, 26650 and 32650 (jelley roll dia. 14mm~32mm; length 25~70mm)
Input Power	Single phase 220 VAC, 50 / 60 Hz 1 kW power
Compressed Air	Compressed air of 0.7 MPa is needed for the operation of this machine Please note the air compressor is not included.
Cathode / Anode Feeding	Loading material: cathode / anode sheets, such as aluminum foil coated with LiFePO4 or LiCoO2 (cathode), and copper foil coated with graphite (anode) Length range: < 1200 mm recommended (length of the feeder bed plus extension) Width range: 25 - 70 mm (adjustable on feeder bed) Thickness range: 100 - 300 μm
Separator Feeding	Loading material: separator film rolls, such as polyethylene (PE) or polypropylene (PP) Length range: separator roll with a diameter < 250 mm  Width range: 25 - 70 mm Thickness range: < 100 μm Tension range: 0 - 4 N for both top and bottom separator films
Winding	Winding needle size: 3.5 mm OD  Electrode winding size: 14 - 32 mm OD, 25 - 70 mm in length To wind an electrode core with a certain OD, a spreadsheet for calculating needed number of turns and electrode sheet length can be downloaded here Winding speed: 0 - 400 rpm adjustable Winding precision: < 0.5 mm edge roughness
Size	1000 mm L x 700 mm W x 900 mm H
Net Weight	150 kg
Warranty	Two years limited warranty with lifetime support Rusting or damage due to improper storage conditions or maintenance is not covered by warranty

 

Picture:




We can supply one stop solution for you.

1. Full set of lithium battery materials, including:
LiMn2O4, LTO, LiNiMnCoO2(NMC), LiCoO2, Graphite(MCMB)and other cathode&anode battery materials; Aluminum foil, copper foils, battery separator, etc.

2. Full set of lithium battery equipments, for example:
Mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine, etc.

3. Full set of lithium battery technology.
We can design the laboratory and production line, according to customer's request.


Any time contact us freely: